David Tanguay asked:
Just as with nearly everything else, there are myths circulating about lightweight, flat panel Plasma TV screens. Understanding the myth of plasma screens and high altitudes has to do with knowing that plasma screens were developed to perform their best located near or at sea level altitudes. Therefore, it makes sense that a plasma TV would have to work harder at higher altitudes to compensate for the difference of exterior pressure.
This compensation results in the generation of heat, which in turn turns on the screens built in cooling fans, which may or may not be included in any particular system. If the Plasma TV screen has cooling fans, they usually transmit a reverberated hum. Hearing a definite buzzing sound signals that the plasma TV does have cooling fans. It is also understandable that the life span of a plasma TV be to some extent shortened.
However, some plasma TVs shows resilience in running at paramount condition of up to 5000 feet, which is pretty good. Technology works every hour developing new innovations for our use. If they can hang Plasma TV’s on the wall, they’ll soon be hanging Plasma TV’s on the walls atop mountains.
Talk with your local dealer over information concerning high altitudes, and be open to buying an LCD or DLP with thin flat screen panels, if there isn’t an available plasma TV for your location. Remember the more an item is requested, the more likely the demand for that item will be satisfied. Your local plasma TV dealer would have the most up to date information concerning these and other issues, so be sure to ask.
Understanding the myth of leaking plasma TV’s, has to do with knowing that it is not possible for gas to leak from its sealed pixel celled structure. Each element of the plasma screen is separate from the others by being sealed as well as the changing plates are sealed. When an unusual amount of pixel space of the screen display goes dark it is not possible to just fill it up again. Plasma gas does not refill, the complete panel should be replaced.
Understanding the myth of Plasma TV’s adaptability with an old VCR has to do with knowing that made for consumer use plasma TV are adaptable with an old VCR which has a component video outputs, AV and S-Video. Unfortunately, VHS is to slow in resolution with an inconsistent and poor color quality for entertaining pleasure on a Plasma TV.
Understanding the myth of Mercury poisoning has to do with knowing that you are more likely to come in contact by eating fish with traces of mercury weekly, than to have a reaction to a scant amount of container filled mercury of a TV viewing screen.
Understanding the myth of energy use has to do with knowing that studies show that the energy use of both the Plasma and LCD TV’s function more or less the same.
Just as with nearly everything else, there are myths circulating about lightweight, flat panel Plasma TV screens. Understanding the myth of plasma screens and high altitudes has to do with knowing that plasma screens were developed to perform their best located near or at sea level altitudes. Therefore, it makes sense that a plasma TV would have to work harder at higher altitudes to compensate for the difference of exterior pressure.
This compensation results in the generation of heat, which in turn turns on the screens built in cooling fans, which may or may not be included in any particular system. If the Plasma TV screen has cooling fans, they usually transmit a reverberated hum. Hearing a definite buzzing sound signals that the plasma TV does have cooling fans. It is also understandable that the life span of a plasma TV be to some extent shortened.
However, some plasma TVs shows resilience in running at paramount condition of up to 5000 feet, which is pretty good. Technology works every hour developing new innovations for our use. If they can hang Plasma TV’s on the wall, they’ll soon be hanging Plasma TV’s on the walls atop mountains.
Talk with your local dealer over information concerning high altitudes, and be open to buying an LCD or DLP with thin flat screen panels, if there isn’t an available plasma TV for your location. Remember the more an item is requested, the more likely the demand for that item will be satisfied. Your local plasma TV dealer would have the most up to date information concerning these and other issues, so be sure to ask.
Understanding the myth of leaking plasma TV’s, has to do with knowing that it is not possible for gas to leak from its sealed pixel celled structure. Each element of the plasma screen is separate from the others by being sealed as well as the changing plates are sealed. When an unusual amount of pixel space of the screen display goes dark it is not possible to just fill it up again. Plasma gas does not refill, the complete panel should be replaced.
Understanding the myth of Plasma TV’s adaptability with an old VCR has to do with knowing that made for consumer use plasma TV are adaptable with an old VCR which has a component video outputs, AV and S-Video. Unfortunately, VHS is to slow in resolution with an inconsistent and poor color quality for entertaining pleasure on a Plasma TV.
Understanding the myth of Mercury poisoning has to do with knowing that you are more likely to come in contact by eating fish with traces of mercury weekly, than to have a reaction to a scant amount of container filled mercury of a TV viewing screen.
Understanding the myth of energy use has to do with knowing that studies show that the energy use of both the Plasma and LCD TV’s function more or less the same.
Filed under Technology
Warren Thompson asked:
Over the years, I have grown really attached to my home theater system. I must say, of all the rooms in the house, my own little movie theater is the one I could not live without. I am absolutely in love with my home theater system and, if you are anything like me, I am sure you will love yours too. I found, when I was initially building my system, that there was so much information to absorb. Every product out there seemed better than the next, and I found myself unsure about which to buy. Here are a few things to keep in mind when shopping for a new home theater projector.
There are two main types of projectors on the market; DLP and LCD. DLP stands for digital light processing. It was invented by Texas Instruments, and utilizes a microscopic array of over 2 million mirrors. DLP has a higher contrast than LCD, but there are some unfavorable consumer reports that note something called the “rainbow effect”. The “rainbow effect” is noticeable when looking from one side of the screen to the other, and is characterized by a sudden burst of color.
LCD stands for liquid crystal display. These projectors have three distinct glass LCD panels inside; one for each component of the video signal (red, green, and blue). While DLP chips reflect light, the LCD panels allow light to pass through them. LCD projectors produce brighter images, and they are known for having excellent color saturation. In the end, you will be hard-pressed to notice a great difference between the two types of projection systems.
When shopping for a new projector, keep your particular needs in the forefront of your thoughts. As I mentioned above, it is really easy to lose yourself in the minutiae of each particular system. Connectivity is a definitely something to be mindful of. Make sure that you are able to connect all of your components, including your gaming system. Nothing beats playing Halo in real-life size! Contract ratio is another important factor; the higher the ratio, the better the picture will be.
The brightness of your projector is another thing to consider. Light output is measured in ANSI (American National Standards Institute) lumens. You will want to avoid a projector that produces anything shy of 1000 lumens. As you are likely aware, the projection resolution is extremely important. This refers to the number of pixels that can be displayed on the screen. Go for something that is no less than 1024×768, as this will allow you to fully appreciate the depth and quality of HDTV. In the end, you should buy the projector that is in line with your needs and your budget. Soprano’s is coming on right now! Time to go!
Over the years, I have grown really attached to my home theater system. I must say, of all the rooms in the house, my own little movie theater is the one I could not live without. I am absolutely in love with my home theater system and, if you are anything like me, I am sure you will love yours too. I found, when I was initially building my system, that there was so much information to absorb. Every product out there seemed better than the next, and I found myself unsure about which to buy. Here are a few things to keep in mind when shopping for a new home theater projector.
There are two main types of projectors on the market; DLP and LCD. DLP stands for digital light processing. It was invented by Texas Instruments, and utilizes a microscopic array of over 2 million mirrors. DLP has a higher contrast than LCD, but there are some unfavorable consumer reports that note something called the “rainbow effect”. The “rainbow effect” is noticeable when looking from one side of the screen to the other, and is characterized by a sudden burst of color.
LCD stands for liquid crystal display. These projectors have three distinct glass LCD panels inside; one for each component of the video signal (red, green, and blue). While DLP chips reflect light, the LCD panels allow light to pass through them. LCD projectors produce brighter images, and they are known for having excellent color saturation. In the end, you will be hard-pressed to notice a great difference between the two types of projection systems.
When shopping for a new projector, keep your particular needs in the forefront of your thoughts. As I mentioned above, it is really easy to lose yourself in the minutiae of each particular system. Connectivity is a definitely something to be mindful of. Make sure that you are able to connect all of your components, including your gaming system. Nothing beats playing Halo in real-life size! Contract ratio is another important factor; the higher the ratio, the better the picture will be.
The brightness of your projector is another thing to consider. Light output is measured in ANSI (American National Standards Institute) lumens. You will want to avoid a projector that produces anything shy of 1000 lumens. As you are likely aware, the projection resolution is extremely important. This refers to the number of pixels that can be displayed on the screen. Go for something that is no less than 1024×768, as this will allow you to fully appreciate the depth and quality of HDTV. In the end, you should buy the projector that is in line with your needs and your budget. Soprano’s is coming on right now! Time to go!
Filed under Art And Entertainment
Warren Thompson asked:
Over the years, I have grown really attached to my home theater system. I must say, of all the rooms in the house, my own little movie theater is the one I could not live without. I am absolutely in love with my home theater system and, if you are anything like me, I am sure you will love yours too. I found, when I was initially building my system, that there was so much information to absorb. Every product out there seemed better than the next, and I found myself unsure about which to buy. Here are a few things to keep in mind when shopping for a new home theater projector.
There are two main types of projectors on the market; DLP and LCD. DLP stands for digital light processing. It was invented by Texas Instruments, and utilizes a microscopic array of over 2 million mirrors. DLP has a higher contrast than LCD, but there are some unfavorable consumer reports that note something called the “rainbow effect”. The “rainbow effect” is noticeable when looking from one side of the screen to the other, and is characterized by a sudden burst of color.
LCD stands for liquid crystal display. These projectors have three distinct glass LCD panels inside; one for each component of the video signal (red, green, and blue). While DLP chips reflect light, the LCD panels allow light to pass through them. LCD projectors produce brighter images, and they are known for having excellent color saturation. In the end, you will be hard-pressed to notice a great difference between the two types of projection systems.
When shopping for a new projector, keep your particular needs in the forefront of your thoughts. As I mentioned above, it is really easy to lose yourself in the minutiae of each particular system. Connectivity is a definitely something to be mindful of. Make sure that you are able to connect all of your components, including your gaming system. Nothing beats playing Halo in real-life size! Contract ratio is another important factor; the higher the ratio, the better the picture will be.
The brightness of your projector is another thing to consider. Light output is measured in ANSI (American National Standards Institute) lumens. You will want to avoid a projector that produces anything shy of 1000 lumens. As you are likely aware, the projection resolution is extremely important. This refers to the number of pixels that can be displayed on the screen. Go for something that is no less than 1024×768, as this will allow you to fully appreciate the depth and quality of HDTV. In the end, you should buy the projector that is in line with your needs and your budget. Soprano’s is coming on right now! Time to go!
Over the years, I have grown really attached to my home theater system. I must say, of all the rooms in the house, my own little movie theater is the one I could not live without. I am absolutely in love with my home theater system and, if you are anything like me, I am sure you will love yours too. I found, when I was initially building my system, that there was so much information to absorb. Every product out there seemed better than the next, and I found myself unsure about which to buy. Here are a few things to keep in mind when shopping for a new home theater projector.
There are two main types of projectors on the market; DLP and LCD. DLP stands for digital light processing. It was invented by Texas Instruments, and utilizes a microscopic array of over 2 million mirrors. DLP has a higher contrast than LCD, but there are some unfavorable consumer reports that note something called the “rainbow effect”. The “rainbow effect” is noticeable when looking from one side of the screen to the other, and is characterized by a sudden burst of color.
LCD stands for liquid crystal display. These projectors have three distinct glass LCD panels inside; one for each component of the video signal (red, green, and blue). While DLP chips reflect light, the LCD panels allow light to pass through them. LCD projectors produce brighter images, and they are known for having excellent color saturation. In the end, you will be hard-pressed to notice a great difference between the two types of projection systems.
When shopping for a new projector, keep your particular needs in the forefront of your thoughts. As I mentioned above, it is really easy to lose yourself in the minutiae of each particular system. Connectivity is a definitely something to be mindful of. Make sure that you are able to connect all of your components, including your gaming system. Nothing beats playing Halo in real-life size! Contract ratio is another important factor; the higher the ratio, the better the picture will be.
The brightness of your projector is another thing to consider. Light output is measured in ANSI (American National Standards Institute) lumens. You will want to avoid a projector that produces anything shy of 1000 lumens. As you are likely aware, the projection resolution is extremely important. This refers to the number of pixels that can be displayed on the screen. Go for something that is no less than 1024×768, as this will allow you to fully appreciate the depth and quality of HDTV. In the end, you should buy the projector that is in line with your needs and your budget. Soprano’s is coming on right now! Time to go!
Filed under Art And Entertainment
Tom Sample asked:
There used to be a time when a home theater was a reserved experience for only the most wealthy – those who could afford private reels of movies and who had the space to dedicate an entire room to the effort. Now, home theater projector models have become more and more affordable, providing a new option for watching not only movies, but also regular television, cable and even computer presentations.
Deciding to turn a room into a home theater is a big decision, but one that can pay off for those who are seriously into entertainment. Nothing other than an actual movie theater can compare to a home theater that’s properly set up. Surround sound, good seating, a huge screen and other amenities can make this room a home’s centerpiece.
With this in mind, many people choose to go for projectors for their home theaters. The reasons behind the choice are many, but are most certainly not limited to the fact the screen can be huge. Up to 300 inches of huge, in fact.
When choosing a projector, a consumer will quickly find out the options are staggering. In general, there are two types of projector systems. The first is LCD, which means it operates using three crystal display devices and a series of mirrors and lenses. The second is DLP, which uses a silicon chip instead of three LDCs. These projectors have become very compact and lightweight, providing buyers the ability to conceal them in out of the way locations. The screens themselves can be very thin and placed directly on a wall. This saves the space a big-screen television will take up.
The basic advantages to projector over television include:
Portability. A projector can be taken anywhere.
Picture size. With many offering great visibility on screens up to 300 inches, this can’t be beat by a regular television.
Bright image. New technology has enabled the use of projectors in bright rooms. Even if the lights are on, the image should still be clear and crisp.
Movie theater experience. These screens really help bring the theater experience home.
When choosing a home theater projection system, the most important things to look for are quality, guarantees and formatting sizes. Since most people who shop for projectors want the real theater experience in their home, the widescreen or 16:9 format is the most sought after. This is the format that’s meant for HDTV and it comes in three basic resolutions – 854×480, 1025×576 and 1280×720. These are more commonly known as 480p, 576p and 720p.
When dealing with modern technology, any of the resolutions should provide some incredible viewing opportunities. Since DVDs generally only provide 480 lines of resolution, the lower setting should work fine. The other options do provide for great viewing as well, especially when you’ll be sitting closer to the screen. Detail on the higher resolutions doesn’t break up as much when viewed from a closer distance.
No matter the projector make or model you end up with, remember a home theater is an investment in some quality movie watching. A room set up correctly can become the primary spot for family living.
There used to be a time when a home theater was a reserved experience for only the most wealthy – those who could afford private reels of movies and who had the space to dedicate an entire room to the effort. Now, home theater projector models have become more and more affordable, providing a new option for watching not only movies, but also regular television, cable and even computer presentations.
Deciding to turn a room into a home theater is a big decision, but one that can pay off for those who are seriously into entertainment. Nothing other than an actual movie theater can compare to a home theater that’s properly set up. Surround sound, good seating, a huge screen and other amenities can make this room a home’s centerpiece.
With this in mind, many people choose to go for projectors for their home theaters. The reasons behind the choice are many, but are most certainly not limited to the fact the screen can be huge. Up to 300 inches of huge, in fact.
When choosing a projector, a consumer will quickly find out the options are staggering. In general, there are two types of projector systems. The first is LCD, which means it operates using three crystal display devices and a series of mirrors and lenses. The second is DLP, which uses a silicon chip instead of three LDCs. These projectors have become very compact and lightweight, providing buyers the ability to conceal them in out of the way locations. The screens themselves can be very thin and placed directly on a wall. This saves the space a big-screen television will take up.
The basic advantages to projector over television include:
Portability. A projector can be taken anywhere.
Picture size. With many offering great visibility on screens up to 300 inches, this can’t be beat by a regular television.
Bright image. New technology has enabled the use of projectors in bright rooms. Even if the lights are on, the image should still be clear and crisp.
Movie theater experience. These screens really help bring the theater experience home.
When choosing a home theater projection system, the most important things to look for are quality, guarantees and formatting sizes. Since most people who shop for projectors want the real theater experience in their home, the widescreen or 16:9 format is the most sought after. This is the format that’s meant for HDTV and it comes in three basic resolutions – 854×480, 1025×576 and 1280×720. These are more commonly known as 480p, 576p and 720p.
When dealing with modern technology, any of the resolutions should provide some incredible viewing opportunities. Since DVDs generally only provide 480 lines of resolution, the lower setting should work fine. The other options do provide for great viewing as well, especially when you’ll be sitting closer to the screen. Detail on the higher resolutions doesn’t break up as much when viewed from a closer distance.
No matter the projector make or model you end up with, remember a home theater is an investment in some quality movie watching. A room set up correctly can become the primary spot for family living.
Filed under Art And Entertainment